Essential details
Shipping:Ocean freight
Product Introduction
The compensator is composed of one diaphragm and two terminators. It is achieved through the flexible deformable rice suction of the calibration official
Axial displacement of the pipe winding line (there are also a few lateral and angular displacements), end pipe connection or direct connection to the pipe
Pipe welding, or welding a flange on it and then connecting it to the pipe flange. The small pull rod on the expansion joint is mainly used for transportation
It is not a load-bearing component for rigid support during transportation or for pre-deformation adjustment of products. This type of inflation
The expansion joint has a simple structure and a low price. Therefore, all possible places on the pipeline should be given priority for examination
Worry.
Installation and usage precautions
1. The direction of the inner lining cylinder should be consistent with the flow direction of the medium (there is a flow direction mark on the expansion joint)
After on-site installation is completed, the small pull rods must be removed.
3. To reduce the force on the pipe rack, such expansion joints can be pre-deformed (pre-tensioned, pre-installed) before installation
Please specify in the contract when the user needs it
Axial displacement of the pipe winding line (there are also a few lateral and angular displacements), end pipe connection or direct connection to the pipe
Pipe welding, or welding a flange on it and then connecting it to the pipe flange. The small pull rod on the expansion joint is mainly used for transportation
It is not a load-bearing component for rigid support during transportation or for pre-deformation adjustment of products. This type of inflation
The expansion joint has a simple structure and a low price. Therefore, all possible places on the pipeline should be given priority for examination
Worry.
Installation and usage precautions
1. The direction of the inner lining cylinder should be consistent with the flow direction of the medium (there is a flow direction mark on the expansion joint)
After on-site installation is completed, the small pull rods must be removed.
3. To reduce the force on the pipe rack, such expansion joints can be pre-deformed (pre-tensioned, pre-installed) before installation
Please specify in the contract when the user needs it
Product details



